Threadlocking Adhesive – low strength. Easy disassembly. Suitable for all metal threaded assemblies.
LOCTITE 222 Threadlocker
NT$0.00
Description
LOCTITE 222 is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and set screws. Good on low-strength metals which could fracture during disassembly, e.g. aluminum or brass. The product works on all metals, including passive substrates such as stainless steel, aluminum and plated surfaces. t is proven to be tolerant of minor contamination due to industrial oils, e.g. motor oils, corrosion prevention oils and cutting fluids.
- Ideal for low-strength threadlocking of adjusting screws, countersunk head screws and set screws
- Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
- Permits disassembly with hand tools
- Especially suited to small thread sizes
| Item number | 222 |
|---|---|
| Thread Size (Maximum) |
M6 |
| Color | Purple |
| Viscosity mPa.s(cP) |
1,200 ~ 3,500 Thixotropic |
| Torque Break N.m / lb.in. |
6 / 53 |
| Torque Prevail N.m / lb.in. |
4 / 35 |
| Temp. Range(℃) | -55℃ ~ 150℃ |
| Cure Speed (Fixture / Full Cure) |
10 min. /24 hrs. |
| Oil Tolerant | – |
| Primers | T or N |
| Specific Gravity | 1.05 |
| Agency Approvals | ✽Mil-Spec(S-46163A) TYPE II, Grade M |
- With Loctite Primers, it can fill larger gaps.
- The screws fixed by the high-strength screw fixing agent can be removed by heating or by using a large torque.
- Before use, clean the next part with a rag or steel brush; if there is oil stain, be sure to remove the oil stain first.
- If it is a blind hole, it is more appropriate to apply glue to the hole.
- If the joint length is long, glue should be applied to the screw and the hole.
Additional information
| Packing | 50ml, 250ml |
|---|
