Description
LOCTITE 262 is a red, general purpose, medium to high strength, thixotropic methacrylate-based adhesive. Steel fixture time is 15 min, brass 8 min and stainless steel 180 min. It fluoresces under UV light to allow monitoring. Ideal for applications where any migration of the adhesive must be prevented. Can tolerate slight contaminations of industrial oils. Suitable for all metal fasteners.
- Resistant to vibration
- Fluoresces to allow quality control and inspection
- Suitable for all metal fasteners
- Med/high strength, general purpose
- Tolerates slight contaminations of industrial oils
- Thixotropic/low viscosity
| Item number | 262 |
|---|---|
| Thread Size (Maximum) |
M20 |
| Color | Red |
| Viscosity mPa.s (cP) |
1,200~2,400 |
| Torque Break N.m/lb.in. |
22 / 190 |
| Torque Prevail N.m/lb.in. |
32 / 280 |
| Temp. Range (℃) | -55℃ ~ 150℃ |
| Cure Speed (Fixture / Full Cure) |
5 min. /24 hrs. |
| Agency Approvals | MIL-2-46163A ASTM D5363 NSF P1 CFIA NSF/ANSI 61 |
- With Loctite Primers, it can fill larger gaps.
- The screws fixed by the high-strength screw fixing agent can be removed by heating or by using a large torque.
- Before use, clean the next part with a rag or steel brush; if there is oil stain, be sure to remove the oil stain first.
- If it is a blind hole, it is more appropriate to apply glue to the hole.
- If the joint length is long, glue should be applied to the screw and the hole.
