Description
LOCTITE 270 is a high-strength threadlocker for maximum efficacy in the securing and sealing of bolts, nuts and studs to prevent loosening due to vibration. The product serves to permanently lock assemblies which must not come loose. It works on all metals, including passive substrates such as stainless steel, aluminum and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. motor oils, corrosion prevention oils and cutting fluids. Can be disassembled by heating to 300°C.
- High-strength general threadlocker for maximum efficacy
- Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
- Works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces)
- Proven to be tolerant of minor contamination due to industrial oils, e.g. motor oils, corrosion prevention oils and cutting fluids
- Permits disassembly with hand tools
- Can be disassembled by heating to 300°C
- P1 NSF Reg. No.: 123006
| Item number | 270 |
|---|---|
| Thread Size (Maximum) |
M6 |
| Color | Green |
| Viscosity mPa.s (cP) |
400 ~ 600 |
| Torque Break N.m/lb.in. |
39 |
| Torque Prevail N.m/lb.in. |
31 |
| Temp. Range (℃) | -55℃~150℃ |
| Cure Speed (Fixture / Full Cure) |
10 min. /24 hrs. |
| Primers | 7649 |
| Specific Gravity | 1.1 |
- With Loctite Primers, it can fill larger gaps.
- The screws fixed by the high-strength screw fixing agent can be removed by heating or by using a large torque.
- Before use, clean the next part with a rag or steel brush; if there is oil stain, be sure to remove the oil stain first.
- If it is a blind hole, it is more appropriate to apply glue to the hole.
- If the joint length is long, glue should be applied to the screw and the hole.
